| Version |
Date |
Changes |
| 3.3.4 |
10/04/2009 |
- New: Improved performance of raw image creation
- New: Added backup and restore of unknown file systems (including raw images into .ADI backups)
- Fixed: App locks in during backup of disk with physically damaged $MFT
- New: Fixing BCD storage after restoring a partition
- Fixed occasionally crashes when creating compressed raw image
- New: Fixing BCD storage after cloning a partition or a disk
- Fixed: disk geometry and Hidden Sectors values in partition's boot sector does not get updated
during cloning
- Fixed: Confirmation window in Clone partition wizard shows wrong target disk
- Fixed: Error=14 when restoring or cloning a raw partition is now treated as warning
"Failed to assign drive letter" and does not interrupt the process
- Fixed: disk geometry in NTFS partition boot sector does not get updated during restore which
sometimes might lead to unbootable system
|
| 3.2.6 |
03/19/2009 |
- Fixed: Closing backup in Explorer.
- Fixed: When creating an image the confirmation dialog shows the disk
number improperly.
- Fixed: Error getting info of a hidden Dell Utility partition.
- Fixed app crash when creating an image. |
| 3.2.4 |
02/27/2009 |
- New: Improved Create Image performance
- New: Automatic check for updates on start (disabled by default)
- New: Windows 7 Beta is supported
- Changed: Increased screen size to fit 120 DPI, added preserving screen size between sessions
- Changed: User now can re-register software to enter new license key
- Fixed: When creating image of a big FAT partition, progress stops at 8.2 GB
- Fixed: App does not create more than one raw images in a batch
- Fixed: Explorer does not show image creation date/time in property dialog
- Fixed: Error 14 while restoring a DELL utility partition
- Fixed: Disk number is shown incorrectly in create confirmation dialog
- Fixed: After selecting a Raw image to create, selecting another Raw image, moving back in wizard and continuing to confirmation dialog, exception is thrown
- Fixed: Explorer sometimes restorers wrong file (other than selected)
- Fixed: Creating backup of NTFS partition finishes in few seconds due to incorrect $BadClus record
- Fixed: When cloning an active partition, wizard suggests to make a destination partition primary by default instead of active |
| 3.1.18 |
11/20/2008 |
- New: Creating multiple disk images in one batch. Raw images and backups can be mixed in one wizard.
- New: Added Floppy Backup and Raw Images support
- Fixed: Exception when an empty FAT16 partition is selected to backup
- Fixed: Used space improperly reported for large FAT32 partition images
- Fixed: Create BootDisk cannot lock a partition due to kernel's open
handles
- Fixed: Error reading cluster XXX. MFT# 8, file: $BadClus.
- Unicode support added (including file names and descriptions) |
| 3.1.13 |
09/26/2008 |
- Fixed: Partition is recovered as Active instead of Logical |
| 3.1.11 |
08/28/2008 |
- Enabled "View Log" in WinPE
- Added Windows Application EventLog support
- Changed: Newer license override existing one |
| 3.1.10 |
07/07/2008 |
- Fixed: When a header selected for restoring from image the target
disk might be not selectable
- New: Added Refresh Devices buttons to create/clone/create raw image
wizards
- Fixed: When closing the application it starts to refresh devices if
Partition Manager was launched
before
- Fixed: "CreateProcess failed. Error=0" error under Vista when
launching Partition Manager
- Fixed: Cluster size smaller than MFT record size (512 bytes) might
cause incorrect $MFT processing
- Improved error checking for partially corrupted NTFS partitions
- Raw Image type DRIVE is treated as PARTITION now
- Added: Creating and burning ISO images of CD/DVD/Blu-Ray |
| 3.1.9 |
06/30/2008 |
Fixed: Restore partition dialog shows "NTFS" or "FAT" type for
unallocated space
* New: remembering the most recent locations list in Create Image
destination page
* New: "Show welcome screen in dialogs" option
* Fixed: Empty error message when creating an image
* Fixed: "Image verification finished with some errors" for raw images
* Fixed: If two dynamic volumes selected for backup, disk was added
twice
* Fixed: App crash under Server 2008 due to old protection lib
* Fixed: Created task not shown in tasks list when compression=HIGH
* Fixed: Create raw image task formats "Creating image. . . " message
incorrectly, causing exception
* New: User has an option to place image of each disk into separate
backup (supported by manual
and scheduled images)
* Fixed: Cloning Vista and Server 2008 system partition
* Added Refresh Devices command
* Added attempt to auto-reduce DVD write speed by 1x |
| 3.1.8 |
04/28/2008 |
* Prevents Disk Signature updates during RAW images restore and
cloning by offering shutdown.
* Added verbose logging for VSS operations, added verbose checkbox to
Settings dialog
* GetVolumeNameForVolumeMountPointW and WRITER_BAD_STATE errors are now
not fatal when gathering VSS writers metadata
* Prompted user to restart VSS service when
VSS_E_SNAPSHOT_SET_IN_PROGRESS happened |
| 3.1.6 |
04/23/2008 |
* Fixed: "Index Root not found" error
* Implemented data read errors tolerance (retries, auto-downsizing
cache, ignoring errors in non-critical data) |
| 3.1.5 |
04/03/2008 |
* Rewritten auto-resize logic: partitions are track-aligned, first
partition keeps its position |
| 3.1.4 |
03/07/2008 |
* Added support for Windows Server 2008 and Windows Server 2008
64-bit |
| 3.1.3 |
03/04/2008 |
* Fixed: Compatibility issue with old RAW images: type of image and
partition type now auto-detected if not specified in .DIM file |
| 3.1.2 |
02/29/2008 |
* Fixed: Burning FAT image on DVD may stop prematurely resulting in
corrupted image
* Fixed: Creating FAT image might show wrong progress numbers where
bytes written is bigger than total
* Fixed: Error "Invalid Bytes Per Sector value: 1" shown when not the
Start Disc chosen as source. |
| 3.1.1 |
02/22/2008 |
* Changed: Partition Manager launches PartMan.exe under WinPE and
Disk Management console under Windows
* Changed: Startup mode under WinPE 2.0 |
| 3.1.0 |
02/21/2008 |
* Fixed: Application crashes during the restoration of more than one
partitions
* Added speed display for disk image restoration, disk cloning and disk
image verification process |
| 3.0.97 |
02/15/2008 |
* More accurate time left estimation
* Fixed: Wizards may forbid to keep partitions original size and
location even if enough space
* Added speed display for disk image creation process
* Added Active@ Boot Disk Creator calls in main window
* Added Active@ Partition Manager calls in main window |
| 3.0.96 |
01/30/2008 |
* Fixed: Running 32-bit app under 64-bit OS
* Fixed: Duplicate disk serial number causes XP to reboot when restoring
MBR
* Fixed: Restore Image shown incorrect Data To Process in progress
dialog due to invalid UsedSpace
* Used disk space is now updated in every wizard, getting actual data;
in progress dialog data to process
displayed instead of used space |
| 3.0.95 |
01/23/2008 |
* Fixed: Empty image might be created of USB drive when there are
flash reader without flash cards
* Fixed: Fails to create/read an image with non-English characters in
filename
* Implemented new licensing model |
| 3.0.94 |
01/12/2008 |
* Fixed: Memory leaks
* Added Blu-ray discs support
* 64-bit code for Vista x64: fixed "VSS Configurator class not
registered" error
* Fixed: Create Raw Image/Clone Disk for Dynamic volume now use device
locking
* New implementation of Create Raw Image and Clone Disk
* Fixed heap corruption and crashes under Vista x64 when creating raw
images |
| 3.0.93 |
12/15/2007 |
* Fixed: Corrupted manifest for Vista privileges elevation causes XP
crash |
| 3.0.91 |
12/10/2007 |
* Fixed: Disk Image Explorer splitter shifts leftward every run
* Fixed: Closing Disk Image Explorer before initialization ends might
cause exception
* Added command line support for opening disk images in Disk Image
Explorer
* Changed bitmaps for backup property dialog |
| 3.0.0 |
|
* Released Active@ Disk Image for Windows |
